Networking and Firewalls Release Notes

Updates for network management, routers, switches, wireless access points, and firewalls.

Get this feed:

Products (9)

Latest Networking and Firewalls Updates

Nov 11, 2026
Date parsed from source:
Nov 11, 2026

First seen by Releasebot:
Nov 11, 2026
OPNsense Community Edition by OPNsense

26.7.9 (November 11, 2026)

OPNsense Community Edition releases another 26.7 update with system-wide performance improvements, clearer privilege authority labels, dashboard and interface enhancements, and extensive security, firewall, networking, and component fixes.
The 26.7 series gets another installment with a few nice feature addition and UX revamps. There are 4 new security advisories on GitHub for the core as well as numerous fixes throughout the components as they are being reported. Of special note is that this update brings a number of performance improvements throughout the system.

We have added “authority” annotations for the privilege selection and user overview. They aim to explain how much access to the system is granted to the user in principle: the default is “administrative” as even though single privilges appear to be low priviliges they are not as administrative (root) tasks are being carried out by the underlying daemons and software. The “limited” label means the user does not have access to root processes and the “unrestricted” label means that the component being accesses has no bounds to system access which may be part of its intended feature scope such as XMLRPC access. We have also marked the static PHP pages as “unrestricted”, because in reality they have historical privilege separation weaknesses that the MVC do not have. This approach will also help shape how we accept security advisories and set their severity.

Here are the full patch notes:

system: dashboard: refactor widget system and introduce cloneable widget types

system: suppress local logging by default and add it as an option for remotes

system: add validation error for attempted user scope change

system: fix certificate widget off by one in remaining days calculation

system: use standard throwReadOnly() on notification dismiss action (reported by Janik Besendorf)

system: implement “source networks” check in hasPrivilege() (reported by Janik Besendorf)

system: add “authority” option to ACLs to explain the effective control over the system for each privilege given

system: add dropdown field type for backup providers (contributed by Greelan)

system: invalidate sysctl cache on apply

system: fix MAILTO cron statement

system: validate uploaded picture types

reporting: health: improve graph metadata, formatting and widget support

interfaces: pass interfaces correctly to IPsec, Unbound during reconfiguration

interfaces: read “lock” property using empty() in legacy page

interfaces: fix track6 assoc_pd comparison typo (contributed by Konstantinos Spartalis)

interfaces: use default icon color for disabled interfaces

Interfaces: add support for TAP devices

interfaces: hostwatch: split off automatic discovery entries from neighbor menu under its canonical service name

interfaces: hostwatch: look up hostnames via reverse DNS API

interfaces: revisit PPP config access

interfaces: move “devices” array out of $ifcfg for reset

interfaces: introduce interfaces_device_wait() for PPP reuse

interfaces: backend call for interfaces_ppps_configure()

interfaces: add return values to PPP configuration

interfaces: extend line ending validation to other PPP fields as well (reported by dead-lamer)

interfaces: fix faulty handling of “dhcp6-ia-pd-len” during assignments save

firewall: decorate paginated rules only

firewall: avoid loading the rule model twice while the initial grid request is in progress

firewall: be more selective which searches get decorated as well

firewall: only getPriority() once and reuse it

firewall: fix query performance regression due to introduction of automatic rules display

firewall: fix alias cleanup for external aliases (contributed by Florian Punz)

firewall: fix performance regression in aliases

firewall: source NAT: use getWellKnown() and properly validate port ranges

firewall: prepare new style scrub support in rules parser

firewall: use row API to handle global collapse/expand state for rules

firewall: remove unused getAntiLockout() function

captive portal: further restrict roaming to IPv6 client sessions

captive portal: account for Idle-Timeout in Access-Accept

captive portal: add configurable CORS policy per zone

captive portal: add limit in template parsing (reported by Janik Besendorf)

intrusion detection: use Suricata-optimized ruleset for URLhaus (contributed by 0nnyx)

intrusion detection: support Suricata datasets in rule metadata

kea: add simple shared_networks option to subnets

firmware: fetch dashboard widget RSS feed from backend

radvd: add optional lifetime setting for PREF64 (contributed by BPplays)

unbound: fix locking in blocklist fetcher

backend: support indefinite TTL in configd

backend: make all long TTLs indefinite

backend: introduce legacy_firewall_model() and legacy_firewall_settings() helpers

lang: translation updates for multiple languages

mvc: ApiControllerBase: introduce basic locking in configd stream handle

mvc: OptionField: optimize option caching

ui: prefix edit/new/copy dialog with associated icon

ui: delegate bootgrid cell handlers

ui: add a clear button to the bootgrid search field (contributed by Alok K. Dhir)

plugins os-acme-client 4.18

plugins: os-caddy 2.2.3

plugins: os-freeradius 1.10.3

plugins: os-frr 2.1

plugins: os-upnp 1.10

plugins: os-openvpn-legacy now denies read-only runtime changes (contributed by Janik Besendorf)

src: revert “ice: fix link speed after changing cable type”

src: aq: assorted backports from stable/15

src: axgbe: fix receive buffers without split-header mode

src: bnxt: assorted backports from stable/15

src: carp: fix global demotion counter to VRRP advertisements

src: e1000: separate DH89xxCC memory errors

src: ena: upgrade ena-com to freebsd v2.8.5

src: iflib: do not ring the transmit doorbell when nothing is pending

src: igmp: refresh the ip header pointer after m_pullup()

src: netinet6: allocate correct size for ip6_fwdtag struct (contributed by pletch)

src: netinet6: fix check for pktinfo outgoing ifindex in route cache

src: netlink: fix unsigned overflow on a truncated message

src: p9fs: fix p9fs_vget_common() panics

src: pf: allows TCP RST packets in the backwards window if ACK matches

src: pf: check extension and AH header length

src: pf: do not corrupt neighbour advertisements when translating

src: pf: do not hash pool address pointers into rule hashes

src: pf: do not leak a source hash row lock in the netlink dump

src: pf: do not loop on an address that is cleared twice in pfr_clr_astats()

src: pf: drain the overload task before VNET rules are freed

src: pf: first-match-wins for nat rules, even in anchors

src: pf: fix a crash on sendfile()

src: pf: free a table entry that cannot be routed

src: pf: free an unparsed rule with pf_krule_free() in pf_handle_addrule()

src: pf: free the packet rate counter of a rule

src: pf: leave the epoch to purge unlinked rules

src: pf: modify pfik_flags atomically

src: pf: parse the GETSTATES state ID as 64 bits

src: pf: register the netlink family only while the VNETs are set up

src: pf: set the reassembly flags under the rules lock

src: pf: take the rules read lock in pf_handle_getrule()

src: pfil: avoid potential mbuf tag leak

src: pfsync: use result of m_pullup()

src: re: harden re_watchdog() recovery and log controller state

src: re: re-arm the TX doorbell when re_txeof() leaves a non-empty ring

src: re: recover TX completions whose MSI was swallowed in re_intr_msi()

src: re:: quiesce RTL8168G+ and reset before freeing buffers in re_stop()

ports: dnspython 2.9.2

ports: expat 2.10.0

ports: krb5 1.22.3

ports: libucl 0.10.0

ports: openssh 10.6p2

ports: openvpn 2.7.9

ports: phpseclib 3.0.58

ports: pkg port epoch is now set to avoid catching a newer and potentially incompatible version from FreeBSD

ports: python 3.13.18

ports: sqlite 3.54.1

Original source
Nov 2, 2026
Date parsed from source:
Nov 2, 2026

First seen by Releasebot:
Nov 3, 2026
MikroTik

RouterOS 7.24.6 [long-term]

MikroTik releases RouterOS 7.24.6, a maintenance update that fixes MLAG, IPsec, Wi-Fi roaming, routing and hardware issues, improves static route performance and system stability, and includes a security fix.
What's new in 7.24.6 (2026-10-30)

bridge - fix BPDUs leaking to the wrong dual-connected bond in MLAG (introduced in v7.24);

bridge - fix VLAN-tagged traffic being looped back in MLAG setups on CRS8xx series switches;

dude - fix the server not starting at boot when data-directory is on a USB disk;

ethernet - fix occasional packet loss on hAP be3 Media;

fetch - fix HTTP fetch getting stuck in a "bad HTTP response" state;

ipsec - fix IKEv2 EAP-TTLS client failing with invalid trust store (introduced in v7.21);

ipsec - fix IPsec tunnels failing after migration from the old QKD settings;

ipsec - fix IPsec tunnels not establishing when an address my-id is configured on the responder;

ptp - fix PTP support on CRS804-4DDQ;

quickset - fix the WAN interface being selected incorrectly;

route - improve static route handling performance;

routing-filter - fix any-regexp community matcher matching an empty community attribute;

routing-filter - fix community delete, filter and modify with regexp-only community lists;

routing-filter - fix host matching in address lists with more than 64 ranges;

sfp - fix DAC EEPROM corruption when disabling 400G ports on CRS804 and CRS812 switches;

system - improve stability (includes CVE-2026-98432);

system - stop the flash configuration store from growing on dynamic configuration changes;

wifi - reuse freed station association IDs;

wifi-mediatek - fix roaming between APs belonging to the same MLO group;

winbox - fix bridge filter window disabling valid fields for IPv6 rules;

Original source
All of your release notes in one feed

Join Releasebot and get updates from OPNsense and hundreds of other software products.

Create account
Get updates with:
Oct 30, 2026
Date parsed from source:
Oct 30, 2026

First seen by Releasebot:
Nov 2, 2026
OPNsense Community Edition by OPNsense

26.7.8 (October 30, 2026)

OPNsense Community Edition releases a security-focused update with fixes across core and third-party components, stricter certificate handling, visible IKEv1 deprecation, and improvements to firewall, routing, and system tools. It also updates key dependencies and plugins.
This update brings another batch of security fixes for core and third party components following one of the weirdest weeks we have ever seen. Please pat yourself on the back – you made it through!

Please take note that OpenSSH 10.6 rejects ML-DSA keys generated with 10.5 so that they have to be deleted and regenerated once. This will be automatic with the reboot or a service restart if the reboot does not happen for any reason.

IKEv1 deprecation in StrongSwan is also much more visible now. We are merely following the upstream lead here. If you have not considered moving away from IKEv1 you should seriously consider it in the mid-term.

Due to parsing and storage inconsistencies leading to configuration injection in the worst case we had to limit the certificate storage to a single certificate per entry. This may create problems down the road we are willing to solve, but for the time being we have to take such security reports serious and not delay them.

We would also like to thank everyone sending in security reports and assessments. The process works best when already confirmed by a human and when not directly published to the Internet. We are looking forward to more of them.

In other news, ECMP route support has hit the development version along with cloneable widgets for the health graphs and a general improvement with the health graphs while at it.

Here are the full patch notes:

system: refactor route deletion and use priv-sep in general settings page

system: fix deprecation warnings in XMLRPC library

system: no longer mark “strict security” as experimental and note that a reboot is recommended when changing the setting

system: write /etc/os-release (partially contributed by Alok K. Dhir)

system: allow a single dynamic interface gateway to work for both IPv4 and IPv6

system: clear snapshot note on next edit (contributed by Konstantinos Spartalis)

system: installer as a real user on demand

system: mark “X509v3 Key Usage” critical for certificate creation

system: fix untrusted directory support in certctl.py

system: add service broker flag for remote handling of Kea

system: fix OCSP URI on certificate generation

system: fix output of pw usershow

system: run file and configuration selfchecks during bootup

system: remove experimental ML-DSA OpenSSH host keys

system: translate $savemsg before passing it on password page

system: fix gettext(), sprintf() order in static pages (contributed by IvanTheGeek)

system: trap errors in remote_backup.php similar to how diag_backup.php handles them

system: add input constraints to tunable names and values

system: ensure that only a single certificate is accepted during save [1] (contributed by Mason Jones)

system: wrap around “time-loop” in RADIUS authenticator for consistency

system: append remote address to the log during authentication if known

system: adjust snapshot note file permissions for priv-sep

reporting: require positive integer values in insight queries

interfaces: priv-sep script for interface apply the legacy way

interfaces: fix handling of prefix delegation size on new assignment page

interfaces: blank description “None” is the default

interfaces: stricter input for several wireless options (reported by Abraxas Labs)

firewall: limit individual filters in live log search to a maximum of 255 characters

firewall: prefer aliases over well-known port names and additional port-related cleanups

firewall: support moving multiple rules in selection order

firewall: increment the sequence when cloning a rule

firewall: add batched log commands to multi enable/disable logging for rules

firmware: opnsense-update: replace known variables instead of using eval [2] (reported by Voidlet)

firmware: tighten validation for mirror URL (reported by Abraxas Labs)

intrusion detection: always initialize reference_html (reported by Adam Korczynski of Ada Logics using Anrophic)

intrusion detection: add abuse.ch API token input

intrusion detection: escape literal percent signs in rulecache.py query format

intrusion detection: add config locking during rule updates (contributed by Konstantinos Spartalis)

ipsec: move ping_hosts.sh to legacy plugin and harden (reported by Adam Korczynski of Ada Logics using Anrophic)

ipsec: deprecate IKEv1 visibly (contributed by Konstantinos Spartalis)

ipsec: add charon retry_initiate_interval to advanced settings (contributed by claudioguareschi)

ipsec: refactor sessions page and retain phase 1 grid selection on tunnel start/stop

kea: add setup.sh to create /var/log/kea before use

monit: fetch status through configd for strict security mode

monit: escape password double quotes with their hex interpretation and prevent the use of escape sequences from the input

unbound: CSV import for overrides and aliases

unbound: remove Abuse.ch - ThreatFox IOC from the list

backend: fix simulate_mode in configd

mvc: avoid empty recordset searches

mvc: ContainerField: exclude volatile fields in isFieldChanged()

mvc: ModelRelationField: safeguard mdlStructure in case setModel() was not executed

mvc: BaseField: add getDefault() and isDefault() for future use

plugins: os-caddy 2.2.2 [3]

plugins: os-netflector 1.0 (contributed by Sergii Bogomolov)

plugins: os-squid 1.5 [4]

src: caroot: TLS certificate store update due to eMudhra compromise [5]

src: bhyve: multiple vulnerabilities in bhyve device models [6]

src: sound: TOCTOU race between sound(4) buffer resizing and mmap [7]

src: tcp: remotely triggerable buffer overflow in tcp_rack [8]

src: tcp: TCP timers may overflow and fire late or not at all [9]

src: hastd: multiple issues in hastd(8) [10]

src: tzdata: import tzdata 2026e [11]

ports: brotli 1.2.1

ports: ca_root_nss / nss 3.132 [12]

ports: curl 8.23.0 [13]

ports: dpinger 3.7 [14]

ports: expat 2.9.0 [15]

ports: openldap 2.6.16 [16]

ports: openssh 10.6p1 [17]

ports: openvpn 2.7.8 [18]

ports: phalcon 5.23.0 [19]

ports: dnspython 2.9.0 [20]

ports: python 3.13.16 [21]

ports: suricata 8.0.8 [22]

ports: unbound 1.26.2 [23]

Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 26, 2026
Palo Alto Networks

PAN-OS 10.2.8-h15 Addressed Issues

Palo Alto Networks releases PAN-OS 10.2.8-h15 with security fixes for two CVEs and reliability improvements across log display, firewall processes, dataplane consistency, Panorama IP address tags, and session inspection.

PAN-OS 10.2.8-h15 Addressed Issues

ISSUE ID | DESCRIPTION

PAN-272809 | A fix was made to address CVE-2024-0012 (PAN-SA-2024-0015) and CVE-2024-9474.

PAN-268823 | Fixed an issue where Monitor > Log Display did not display all logs when you applied a filter.

PAN-262287 | Fixed an issue where dereferencing a NULL pointer that occurred caused pan_task processes to stop responding.

PAN-244894 | Fixed an issue where turning off mprelay logging caused mprelay heartbeat failure.

PAN-244227 | Fixed an issue where inconsistent FIB entries across the dataplane were not detected.

PAN-238610 | Fixed an issue with the Panorama Virtual Appliance where, after the mgmtsrvr restarted on the passive appliance, stale IP address tags were pushed to the connected firewalls with the message clear all registered ip addresses.

PAN-226361 | Fixed an issue where sessions bypassed L7 inspection or ended unexpectedly with the error resources unavailable when the firewall incorrectly interpreted the Content and Threat Detection (CTD) global packet queue as being full.
Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 26, 2026
Palo Alto Networks

PAN-OS 10.2.5-h1 Addressed Issues

Palo Alto Networks fixes a Panorama CLI timeout that could block logins and commands when checking rule-hit counts.

Fixed an issue where running the show rule-hit-count CLI command on Panorama displayed the error message Server error : Timed out while getting config lock. Please try again. when attempting to log in or run CLI commands.
Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 26, 2026
Palo Alto Networks

PAN-OS 10.2.11 Known Issues

Palo Alto Networks documents outstanding PAN-OS 10.2.11 issues affecting firewalls, Panorama, WildFire and GlobalProtect, including risks involving upgrades, memory leaks and traffic handling. The notes also point to fixes available in later maintenance releases.

The following list includes only outstanding known issues specific to PAN-OS® 10.2.11. This list includes issues specific to Panorama™, GlobalProtect™, VM-Series plugins, and WildFire®, as well as known issues that apply more generally or that are not identified by an issue ID.

ISSUE ID
DESCRIPTION

WF500-5854
The WildFire analysis report on the firewall log viewer (Monitoring > WildFire Submissions) does not display the following data fields: File Type, SHA-256, MD-5, and File Size". Workaround: Download and open the WildFire analysis report in the PDF format using the link in the upper right-hand corner of the Detailed Log View.

WF500-5843
In a WildFire appliance cluster, issuing the show cluster-all peers CLI command when a node within the cluster is being rebooted generates the following error: Server error : An error occured.

WF500-5840
The sample analysis statistics that are returned when issuing the show wildfire local statistics CLI command in WildFire appliance cluster deployments may not accurately reflect the number of samples that have been processed.

WF500-5823
The following WildFire appliance CLI command does not return a signature generation status as expected: show wildfire global signature-status. This does not corrupt or otherwise prevent the WildFire appliance from analyzing a sample.

WF500-5781
The WildFire appliance might erroneously generate and log the following device certification error: Device certificate is missing or invalid. It cannot be renewed.

WF500-5754
In WildFire appliance clusters, issuing the show cluster controller CLI command generates an error when an IPv6 address is configured for the management interface but not for the cluster interface. Workaround: Ensure all WildFire appliance interfaces that are enabled use matching protocols (all IPv4 or all IPv6).

WF500-5632
The number of registered WildFire appliances reported in Panorama (Panorama > Managed WildFire Appliances >Firewalls Connected > View) does not accurately reflect the current status of connected WildFire appliances.

PAN-306555
This issue is now resolved. See PAN-OS 10.2.18-h8 Addressed Issues.
A race condition may cause the dataplane to restart unexpectedly when a zip decompression offload result is returned for a session that has already closed. The session state is not validated before processing the result because the offload result does not follow the fastpath where these checks are normally performed. Workaround: Disable zip hardware offloading (may cause higher CPU usage).

PAN-304756
This issue is now resolved. See PAN-OS 10.2.13-h18 Addressed Issuesand PAN-OS 10.2.16-h6 Addressed Issues.
After you disable the shared optimization feature in Panorama, ensure that you perform a full configuration push to all managed multi-vsys devices to re-establish a baseline. Failure to include every device group associated with the multi-vsys device during this push may result in incomplete or inconsistent configurations across virtual systems.

PAN-297610
A firewall may become unresponsive after an upgrade due to the fsck command scanning drive partitions in parallel with the root partition, causing the process to take an extended amount of time.

PAN-297295
(VM-Series firewalls in Microsoft Azure environments only) After upgrading to an affected release, the firewall restarts continuously because the brdagent process restarts multiple times and exhausts its restart limit, resulting in a segfault error. This issue occurs when a high burst of traffic is sent to the Azure PA-VM (Palo Alto Networks Virtual Machine), and impacts production environments due to the regular reboots. Workaround: Migrate the VM instance to Dv5 instance type. On these instance types, SYN packets are not routed to the synthetic path, avoiding this condition. Suggested direct resizing paths are: D3_v2/DS3_v2 to D8ds_v5; D4_v2/DS4_v2 to D8ds_v5; D5_v2/DS5_v2 to D16ds_v5. Azure VMs with ephemeral storage can only be resized to another type with ephemeral storage.

PAN-295803
A configd memory leak occurs post commit (during Panorama connectivity check), potentially leading to OOM (out of memory condition) and device reboot.

PAN-295255
Palo Alto Networks next-generation firewalls may experience service disruptions due to all_task process crashes when deployed in environments having non-uniform MTU and are terminating IPSec tunnels.

PAN-292344
When upgrading from PAN-OS 10.2.9-h1 to PAN-OS 10.2.13-h5, the firewall reboots repeatedly and enters maintenance mode.

PAN-291716
This issue is now resolved. See PAN-OS 10.2.17 Addressed Issues.
During a commit, the firewall experiences an out-of-memory (OOM) condition due to a memory leak and displays an error message. This issue causes the device to crash and reboot unexpectedly.

PAN-291288
This issue is now resolved. See PAN-OS 10.2.16-h6 Addressed Issues.
A memory leak in the configd process might lead to an active firewall to reboot due to an Out-of-Memory (OOM) condition. This issue is observed when specific status commands, such as request log-collector forwarding status are executed at high frequencies.

PAN-290996
This issue is now resolved. See PAN-OS 10.2.16-h1 Addressed Issues.
When performing an SNMP walk, the Connections Per Second (CPS) counters incorrectly return a value of 0 for each virtual system (VSYS), despite the firewall actively processing connections.

PAN-290088
When pushing configurations from Panorama to a firewall, a memory leak might occur in the firewall's configd process, particularly when the configurations contain shared policies. Each configuration push causes the configd process to consume additional memory that is not released after the commit completes.

PAN-288097
This issue is now resolved. See PAN-OS 10.2.18 Addressed Issues.
(Firewalls in HA configurations only) Routed process may stop responding after changing MTU or any link parameters when OSPF and PIM are enabled on the same interface.

PAN-287871
When SSL Inbound Inspection is enabled and the firewall receives fragmented Client Hello packets that include the TCP timestamp option, the Client Hello message is forwarded to the destination server without the timestamp option.

PAN-287803
Users might be unable to access some URLs due to issues involving the accumulation proxy and the Path Maximum Transmission Unit (MTU). To address this issue, use one of the following workarounds: Configure the Adjust TCP MSS option for the egress interface to the unreachable server. The amount to adjust the maximum segment size depends on the path to the server. Disable the accumulation proxy using the debug dataplane set ssl-decrypt accumulate-client-hello disable yes CLI command.

PAN-286231
When performing a partial Commit and Push on Panorama, there is a risk that unintended configuration changes might be pushed to a firewall. This issue is more likely to occur in the following scenarios: When you run Commit and Push operations as a single action. When you trigger multiple parallel commit-all jobs at the same time. Device groups and templates have different configuration synchronization versions. Workaround: Perform commit and push as two separate, sequential steps, or perform a full push instead of selective push.

PAN-285894
This issue is now resolved. See PAN-OS 10.2.13-h10 Addressed Issues.
If the Preserve Pre-NAT feature is enabled, dataplane crashes may occur, which could result in firewall reboots. Workaround: Disable the Preserve Pre-NAT feature using the set deviceconfig setting preserve-prenat-feature no CLI command.

PAN-284073
The firewall web interface becomes inaccessible and commits fail.

PAN-284067
A cumulative memory leak in the devsrvr process gets progressively worse whenever the CLI command show running application statistics is issued. This memory leak will gradually consume system memory and produce an out-of-memory (OOM) condition, leading to an eventual firewall reboot. Workaround: Avoid using the CLI command: show running application statistics.

PAN-281370
The Advanced WildFire Inline ML models OOXML and Mach-O erroneously display as being available from the CLI; however, they are only available on PAN-OS 11.1.3 and later releases.

PAN-279746
An SSL/TLS Client Hello may not be sent if the Client Hello arrives at the firewall in multiple TCP segments and the traffic is not subject to SSL decryption.

PAN-273158
(PA-7000 Series firewalls only) Due to an incorrect configuration on the ASIC, receiving a mix of jumbo and non-jumbo packets may cause silent packet drops or application slowness.

PAN-265336
This issue is now resolved. See PAN-OS 10.2.11-h2 Addressed Issues.
Copper ports flap when generating a technical support file, executing telemetry, or retrieving port status using a Management Data Input/Output (MDIO) read.

PAN-264680
This issue is now resolved. See PAN-OS 10.2.11-h3 Addressed Issues.
(PA-220 firewalls only) Device > Setup is not displayed when the Enterprise Data Loss Prevention (E-DLP) plugin is installed. Workaround: Uninstall the Enterprise DLP plugin. Log in to the firewall web interface. Select Device > Plugins. Search for dlp. Uninstall.

PAN-264580
(PA-3400 Series firewalls only) Upgrading to PAN-OS 10.2.11 results in the following error: Target image validation failed with error invalid literal for int() with base 10.

PAN-263226
When SSL decryption is enabled and Client Hello messages span multiple TCP segments, elements from the proxy_l2info memory pool may not be freed properly. Memory leaks in this pool cause some SSL decryption sessions to fail. Workaround: Disable Client Hello accumulation using the debug dataplane set ssl-decrypt accumulate-client-hello disable yes CLI command.

PAN-262287
This issue is now resolved. See PAN-OS 10.2.13 Addressed Issues.
Dereferencing a NULL pointer that occurs might cause pan_task processes to crash.

PAN-261429
This issue is now resolved. See PAN-OS 10.2.15 Addressed Issues.
The command show auth radius-require-msg-authentic might return no output.

PAN-260851
From the NGFW or Panorama CLI, you can override the existing application tag even if Disable Override is enabled for the application (Objects > Applications) tag.

PAN-259769
GlobalProtect portal is not accessible via a web browser and the app displays the error ERR_EMPTY_RESPONSE.

PAN-257957
This issue is now resolved. See PAN-OS 10.2.12 Addressed Issues. Affects 10.2.11-h1 and later 10.2 releases.
If you enable FIPS-CC mode and use the PAP or CHAP authentication methods for your RADIUS server, the authd process may restart unexpectedly. To avoid this issue, use one of the following workarounds: If you use PAN-OS 10.2.10-h3, 10.2.11, or an earlier version, configure the RADIUS server so that it does not send the message authenticator back to client. Use other protocols, such as LDAP, Kerberos, TACACS+, SAML, RADIUS EAP, instead of RADIUS PAP or CHAP. Change from FIPS mode to normal mode.

PAN-257601
Fixed in PAN-OS 10.2.11. Affects 10.2.11-h2 and later 10.2 releases.
(PA-5450 firewalls only) Networking cards can experience an internal link fault, causing path monitoring failure on the Dataplane Processing Card (DPC).

PAN-237106
LSVPN satellite certificates may be generated with serial numbers exceeding 40 hexadecimal characters. This causes certificate revocation and deletion operations to fail with the following error messages: db-serialno can be at most 40 characters; db-serialno is invalid. Workaround: To resolve this issue, use the following CLI commands with the LSVPN satellite serial number to manually delete or revoke the affected certificates: Delete certificate information: delete sslmgr-store certificate-info portal name serialno . Revoke satellite certificates: delete sslmgr-store satellite-info-revoke-certificate portal serialno .

PAN-234015
The X-Forwarded-For (XFF) value is not displayed in Traffic logs.

PAN-223365
The Panorama management server is unable to query any logs if the ElasticSearch health status for any Log Collector (Panorama > Managed Collector is degraded. Workaround: Log in to the Log Collector CLI and restart ElasticSearch. admin debug elasticsearch es-restart all

PAN-229865
Upgrading a PA-220 firewall running a PAN-OS 10.1 release fails when the target PAN-OS upgrade version is PAN-OS 10.2.5. Workaround: On your upgrade path to PAN-OS 10.2.5, first upgrade to PAN-OS 10.2.4 and then upgrade to PAN-OS 10.2.5.

PAN-226361
This issue is now resolved. See PAN-OS 10.2.11-h4 Addressed Issues.
Sessions might end unexpectedly with the error resources-unavailable when the firewall incorrectly interprets the Content and Threat Detection (CTD) global packet queue as being full.

PAN-223677
(PA-3410, PA-3420, PA-3430, PA-3440, PA-5410, PA-5420, and PA-5430 firewalls) By enabling the Lockless QoS feature, a slight degradation in App-ID and Threat performance is expected.

PAN-222586
On PA-5410, PA-5420, and PA-5430 firewalls, the Filter dropdown menus, Forward Methods, and Built-In Actions for Correlation Log settings (Device > Log Settings) are not displayed and cannot be configured.

PAN-221775
A Malformed Request error is displayed when you Test Connection for an email server profile (Device > Server Profiles > Email) using SMTP over TLS and the Password includes an ampersand (&).

PAN-213746
On the Panorama management server, the Hostkey displayed as undefined undefined if you override an SSH Service Profile (Device > Certificate Management > SSH Service Profile) Hostkey configured in a Template from the Template Stack.

PAN-213119
PA-5410 and PA-5420 firewalls display the following error when you view the Block IP list (Monitor > Block IP): show -> dis-block-table is unexpected

PAN-212889
This issue is now resolved. See PAN-OS 10.2.14 Addressed Issues.
On the Panorama management server, different threat names are used when querying the same threat in the Threat Monitor (Monitor > App Scope > Threat Monitor) and ACC. This results in the ACC displaying no data to display when you are redirected to the ACC after clicking a threat name in the Threat Monitor and filtering the same threat name in the Global Filters.

PAN-212533
Modifying the Administrator Type for an existing administrator (Device > Administrators or Panorama >Administrators) from Superuser to a Role-Based custom admin, or vice versa, does not modify the access privileges of the administrator.

PAN-211531
On the Panorama management server, admins can still perform a selective push to managed firewalls when Push All Changes and Push for Other Admins are disabled in the admin role profile (Panorama > Admin Roles).

PAN-209288
Certificates are not successfully generated using SCEP (Device > Certificate Management > SCEP).

PAN-208622
A file upload to Box.com exceeding 6 files gets stuck and fails to upload if you specify an Enterprise DLP data filtering profile (Objects > DLP > Data Filtering Profiles with the Action set to Block to a Security policy rule (Policies > Security).

PAN-204689
Upon upgrade to PAN-OS 10.2.4, the following GlobalProtect settings do not work: Allow user to disconnect GlobalProtect App > Allow with Passcode; Allow user to Disable GlobalProtect App > Allow with Passcode; Allow User to Uninstall GlobalProtect App Allow with Password.

PAN-196758
On the Panorama management server, pushing a configuration change to firewalls leveraging SD-WAN erroneously show the auto-provisioned BGP configurations for SD-WAN as being edited or deleted despite no edits or deletions being made when you Preview Changes (Commit > Push to Devices >Edit Selections or Commit > Commit and Push > Edit Selections).

PAN-196504
License deactivation fails for VM-Series firewalls licensed using PA-VM Bundle 3 (BND3).

PAN-194996
When using a 10.2.2 Panorama to manage a Panorama Managed Prisma Access 3.1.2 deployment, allocating bandwidth for a remote network deployment fails (the OK button is grayed out). Workaround: Retry the operation.

PAN-194519
(PA-5450 firewall only) Trying to configure a custom payload format under Device > Server Profiles > HTTP yields a JavaScript error.

PAN-194515
(PA-5450 firewall only) The Panorama web interface does not display any predefined template stack variables in the dropdown menu under Device > Setup > Log Interface > IP Address. Workaround: Configure the log interface IP address on the individual firewall web interface instead of on Panorama.

PAN-194424
(PA-5450 firewall only) Upgrading to PAN-OS 10.2.2 while having a log interface configured can cause both the log interface and the management interface to remain connected to the log collector. Workaround: Restart the log receiver service by running the following CLI command: debug software restart process log-receiver

PAN-194202
(PA-5450 firewall only) If the management interface and logging interface are configured on the same subnetwork, the firewall conducts log forwarding using the management interface instead of the logging interface.

PAN-190727
(PA-5450 firewall only) Documentation for configuring the log interface is unavailable on the web interface and in the PAN-OS Administrator’s Guide.

PAN-189111
After deleting an MP pod and it comes up, the show routing command output appears empty and traffic stops working.

PAN-189076
On a firewall with Advanced Routing enabled, OSPFv3 peers using a broadcast link and a designated router (DR) priority of 0 (zero) are stuck in a two-way state after HA failover. Workaround: Configure at least one OSPFv3 neighbor with a non-zero priority setting in the same broadcast domain.

PAN-188358
After triggering a soft reboot on an M-700 appliance, the Management port LEDs do not light up when a 10G Ethernet cable is plugged in.

PAN-187685
On the Panorama management server, the Template Status displays no synchronization status (Panorama > Managed Devices > Summary) after a bootstrapped firewall is successfully added to Panorama. Workaround: After the bootstrapped firewall is successfully added to Panorama, log in to the Panorama web interface and select Commit > Push to Devices.

PAN-187643
If you enable SCTP security using a Panorama template when SCTP INIT Flood Protection is enabled in the Zone Protection profile using Panorama and you commit all changes, the commit is successful but the SCTP INIT option is not available in the Zone Protection profile. Workaround: Log out of the firewall and log in again to make the SCIT INIT option available on the web interface.

PAN-187612
On the Panorama management server, not all data profiles (Objects > DLP Data Filtering Profiles) are displayed after you: Upgrade Panorama to PAN-OS 10.2 and upgrade the Enterprise DLP plugin to version 3.0; downgrade Panorama to PAN-OS 10.1 and downgrade the Enterprise DLP plugin to version 1.0. Workaround: Log in to the Panorama CLI and reset the DLP plugin. admin > request plugins dlp reset

PAN-187407
The configured Advanced Threat Prevention inline cloud analysis action for a given model might not be honored under the following condition: If the firewall is set to Hold client request for category lookup and the action set to Reset-Both and the URL cache has been cleared, the first request for inline cloud analysis will be bypassed.

PAN-187370
On a firewall with Advanced Routing enabled, if there is also a logical router instance that uses the default configuration and has no interfaces assigned to it, this will result in terminating the management daemon and main routing daemon in the firewall during commit. Workaround: Do not use a logical router instance with no interfaces bound to it.

PAN-186283
Templates appear out-of-sync on Panorama after successfully deploying the CFT stack using the Panorama plugin for AWS. Workaround: Use Commit > Push to Devices to synchronize the templates.

PAN-186282
On HA deployments on AWS and Azure, Panorama fails to populate match criteria automatically when adding dynamic address groups. Workaround: Reboot the Panorama HA pair.

PAN-184406
Using the CLI to add a RAID disk pair to an M-700 appliance causes the dmdb process to crash. Workaround: Contact customer support to stop the dmdb process before adding a RAID disk pair to an M-700 appliance.

PAN-183404
Static IP addresses are not recognized when "and" operators are used with IP CIDR range.

PAN-181933
If you use multiple log forwarding cards (LFCs) on the PA-7000 Series, all of the cards may not receive all of the updates and the mappings for the clients may become out of sync, which causes the firewall to not correctly populate the Source User column in the session logs.

PAN-181823
On a PA-5400 Series firewall (minus the PA-5450), setting the peer port to forced 10M or 100M speed causes any multi-gigabit RJ-45 ports on the firewall to go down if they are set to Auto.

PAN-180661
On the Panorama management server, pushing an unsupported Minimum Password Complexity (Device > Setup> Management) to a managed firewall erroneously displays commit time out as the reason the commit failed.

PAN-180104
When upgrading a CN-Series as a DaemonSet deployment to PAN-OS 10.2, CN-NGFW pods fail to connect to CN-MGMT pod if the Kubernetes cluster previously had a CN-Series as a DaemonSet deployment running PAN-OS 10.0 or 10.1. Workaround: Reboot the worker nodes before upgrading to PAN-OS 10.2.

PAN-178194
A user interface issue in PAN-OS renders the contents of the Inline ML tab in the URL Filtering Profile inaccessible on firewalls licensed for Advanced URL Filtering. Additionally, a message indicating that a License required for URL filtering to function is unavailable displays at the bottom of the UI. These errors do not affect the operation of Advanced URL Filtering or URL Filtering inline ML. Workaround: Configuration settings for URL Filtering inline ML must be applied through the CLI. The following configuration commands are available: Define URL exceptions for specific websites— admin# set profiles url-filtering mlav-category-exception; Configuration settings for each inline ML model— admin# set profiles url-filtering mlav-engine-urlbased-enabled

PAN-177455
PAN-OS 10.2.0 is not supported on PA-7000 Series firewalls with HA (high availability) clustering enabled and using an HA4 communication link. Attempting to load PAN-OS 10.2.0 on the firewall causes the PA-7000 100G NPC to go offline. As a result, the firewall fails to boot normally and enters maintenance mode. HA pairs of Active-Passive and Active-Active firewalls are not affected.

PAN-175915
When the firewall is deployed on N3 and N11 interfaces in 5G networks and 5G-HTTP/2 traffic inspection is enabled in the Mobile Network Protection Profile, the Traffic logs do not display network slice SST and SD values.

PAN-174982
In HA active/active configurations where, when interfaces that were associated with a virtual router were deleted, the configuration change did not sync.

PAN-172274
When you activate the Advanced URL Filtering license, your license entitlements for PAN-DB and Advanced URL Filtering might not display correctly on the firewall — this is a display anomaly, not a licensing issue, and does not affect access to the services. Workaround: Issue the following command to retrieve and update the licenses: license request fetch.

PAN-171938
No results are displayed when you Show Application Filter for a Security policy rule (Policies > Security > Application >Value > Show Application Filter).
Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 26, 2026
Palo Alto Networks

PAN-OS 10.2.0 Known Issues

Palo Alto Networks documents known issues in PAN-OS 10.2.0 across firewalls, Panorama, GlobalProtect, WildFire and CN-Series, with workarounds and references to fixes in later releases.

The following list includes only outstanding known issues specific to PAN-OS® 10.2.0. This list includes issues specific to Panorama™, GlobalProtect™, VM-Series plugins, CN-Series firewall, and WildFire®, as well as known issues that apply more generally or that are not identified by an issue ID.

ISSUE ID
DESCRIPTION

WIF-495
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
On the Panorama management server, edits made to an existing data filtering profile (Objects > DLP > Data Filtering Profiles) can result in matching traffic not being detected by Enterprise DLP.

WF500-5754
In WildFire appliance clusters, issuing the show cluster controller CLI command generates an error when an IPv6 address is configured for the management interface but not for the cluster interface. Workaround: Ensure all WildFire appliance interfaces that are enabled use matching protocols (all IPv4 or all IPv6).

WF500-5632
The number of registered WildFire appliances reported in Panorama (Panorama > Managed WildFire Appliances >Firewalls Connected > View) does not accurately reflect the current status of connected WildFire appliances.

PAN-306555
This issue is now resolved. See PAN-OS 10.2.18-h8 Addressed Issues.
A race condition may cause the dataplane to restart unexpectedly when a zip decompression offload result is returned for a session that has already closed. The session state is not validated before processing the result because the offload result does not follow the fastpath where these checks are normally performed. Workaround: Disable zip hardware offloading (may cause higher CPU usage).

PAN-304756
This issue is now resolved. See PAN-OS 10.2.13-h18 Addressed Issuesand PAN-OS 10.2.16-h6 Addressed Issues.
After you disable the shared optimization feature in Panorama, ensure that you perform a full configuration push to all managed multi-vsys devices to re-establish a baseline. Failure to include every device group associated with the multi-vsys device during this push may result in incomplete or inconsistent configurations across virtual systems.

PAN-297610
A firewall may become unresponsive after an upgrade due to the fsck command scanning drive partitions in parallel with the root partition, causing the process to take an extended amount of time.

PAN-297295
(VM-Series firewalls in Microsoft Azure environments only) After upgrading to an affected release, the firewall restarts continuously because the brdagent process restarts multiple times and exhausts its restart limit, resulting in a segfault error. This issue occurs when a high burst of traffic is sent to the Azure PA-VM (Palo Alto Networks Virtual Machine), and impacts production environments due to the regular reboots. Workaround: Migrate the VM instance to Dv5 instance type. On these instance types, SYN packets are not routed to the synthetic path, avoiding this condition. Suggested direct resizing paths are: D3_v2/DS3_v2 to D8ds_v5 D4_v2/DS4_v2 to D8ds_v5 D5_v2/DS5_v2 to D16ds_v5 Azure VMs with ephemeral storage can only be resized to another type with ephemeral storage.

PAN-295803
A configd memory leak occurs post commit (during Panorama connectivity check), potentially leading to OOM (out of memory condition) and device reboot.

PAN-295255
Palo Alto Networks next-generation firewalls may experience service disruptions due to all_task process crashes when deployed in environments having non-uniform MTU and are terminating IPSec tunnels.

PAN-291716
This issue is now resolved. See PAN-OS 10.2.17 Addressed Issues.
During a commit, the firewall experiences an out-of-memory (OOM) condition due to a memory leak and displays an error message. This issue causes the device to crash and reboot unexpectedly.

PAN-291288
This issue is now resolved. See PAN-OS 10.2.16-h6 Addressed Issues
A memory leak in the configd process might lead to an active firewall to reboot due to an Out-of-Memory (OOM) condition. This issue is observed when specific status commands, such as request log-collector forwarding status are executed at high frequencies.

PAN-288097
(Firewalls in HA configurations only) Routed process may stop responding after changing MTU or any link parameters when OSPF and PIM are enabled on the same interface.

PAN-286231
When performing a partial Commit and Push on Panorama, there is a risk that unintended configuration changes might be pushed to a firewall. This issue is more likely to occur in the following scenarios: When you run Commit and Push operations as a single action. When you trigger multiple parallel commit-all jobs at the same time. Device groups and templates have different configuration synchronization versions. Workaround: Perform one of the following steps: Perform commit and push as two separate, sequential steps. Perform a full push instead of selective push.

PAN-284073
The firewall web interface becomes inaccessible and commits fail.

PAN-284067
A cumulative memory leak in the devsrvr process gets progressively worse whenever the CLI command show running application statistics is issued. This memory leak will gradually consume system memory and produce an out-of-memory (OOM) condition, leading to an eventual firewall reboot. Workaround: Avoid using the CLI command: show running application statistics.

PAN-281370
The Advanced WildFire Inline ML models OOXML and Mach-O erroneously display as being available from the CLI; however, they are only available on PAN-OS 11.1.3 and later releases.

PAN-273158
(PA-7000 Series firewalls only) Due to an incorrect configuration on the ASIC, receiving a mix of jumbo and non-jumbo packets may cause silent packet drops or application slowness.

PAN-264281
When upgrading a ZTP firewall from PAN-OS 10.2 to PAN-OS 11.1 or later versions, if you use the To SW Version column to specify the target PAN-OS version, the upgrade process downloads and installs the intermediary base version containing an expired root certificate. This causes the ZTP firewall to lose connection with Panorama Workaround: Follow the standard upgrade process from Panorama, which you use for non-ZTP firewalls, to upgrade to the target PAN-OS version that contains the valid root certificate.

PAN-260851
From the NGFW or Panorama CLI, you can override the existing application tag even if Disable Override is enabled for the application (Objects > Applications) tag.

PAN-259769
GlobalProtect portal is not accessible via a web browser and the app displays the error ERR_EMPTY_RESPONSE.

PAN-250062
Device telemetry might fail at configured intervals due to bundle generation issues.

PAN-243951
On the Panorama management sever in an active/passive High Availability (HA) configuration, managed devices (Panorama >Managed Devices > Summary) display as out-of-sync on the passive HA peer when configuration changes are made to the SD-WAN (Panorama > SD-WAN) configuration on the active HA peer. Workaround: Manually synchronize the Panorama HA peers. Log in to the Panorama web interface on the active HA peer. Select Commit and Commit to Panorama the SD-WAN configuration changes on the active HA peer. On the passive HA peer, select Panorama > Managed Devices > Summary and observe that the managed devices are now out-of-sync. Log in to the primary HA peer Panorama CLI and trigger a manual synchronization between the active and secondary HA peers. request high-availability sync-to-remote running-config Log back in to the active HA peer Panorama web interface and select Commit > Push to Devices and Push.

PAN-241536
On the Panorama management server, a user with an Admin Role is unable to modify or add filters to profiles under Panorama > Network > Routing > Routing Profiles > Filters, despite having the necessary read and write privileges.

PAN-234408
Enterprise DLP cannot detect and block non-file based traffic for ChatGPT from traffic forwarded to the DLP cloud service from an NGFW.

PAN-229702
After upgrading a Panorama HA pair to PAN-OS 11.1, the ElasticSearch connectivity might fail to establish. The issue occurs because the client certificate on one of the Panorama devices does not have the necessary Extended Key Usage (EKU) set for server authentication, which is required for secure TLS communication. Workaround:Contact Customer Support to renew the root client certificate.

PAN-227344
On the Panorama management server, PDF Summary Reports (Monitor > PDF Reports > Manage PDF Summary) display no data and are blank when predefined reports are included in the summary report.

PAN-225337
This issue is now resolved. See PAN-OS 10.2.7 Addressed Issues.
On the Panorama management server, the configuration push to a multi-vsys firewall fails if you: Create a Shared and vsys-specific device group configuration object with an indentical name. For example, a Shared address object called SharedAO1 and a vsys-specific address object also called SharedAO1. Reference the Shared object in another Shared configuration. For example, reference the Shared address object (SharedAO1) in a Shared address group called SharedAG1. Use the Shared configuration object with the reference in a vsys-specific configuration. For example, reference the Shared address group (SharedAG1) in a vsys-specific policy rule. Workaround: Select Panorama > Setup > Management and edit the Panorama Settings to enable one of the following: Shared Unused Address and Service Objects with Devices—This options pushes all Shared objects, along with device group specific objects, to managed firewalls. This is a global setting and applies to all managed firewalls, and may result in pushing too many configuration objects to your managed firewalls. Objects defined in ancestors will take higher precedence—This option specifies that in the event of objects with the same name, ancestor object take precedence over descendent objects. In this case, the Shared objects take precedence over the vsys-specific object. This is a global setting and applies to all managed firewalls. In the example above, if the IP address for the Shared SharedAO1 object was 10.1.1.1 and the device group specific SharedAO1 was 10.2.2.2, the 10.1.1.1 IP address takes precedence. Alternatively, you can remove the duplicate address objects from the device group configuration to allow only the Shared objects in your configuration.

PAN-223488
This issue is now resolved. See PAN-OS 10.2.7 Addressed Issues.
Closed ElasticSearch shards are not deleted from a Panorama M-Series or virtual appliance. This causes the ElasticSearch shard purging to not work as expected, resulting in high disk usage.

PAN-223365
The Panorama management server is unable to query any logs if the ElasticSearch health status for any Log Collector (Panorama > Managed Collector is degraded. Workaround: Log in to the Log Collector CLI and restart ElasticSearch. admin debug elasticsearch es-restart all

PAN-222586
On PA-5410, PA-5420, and PA-5430 firewalls, the Filter dropdown menus, Forward Methods, and Built-In Actions for Correlation Log settings (Device > Log Settings) are not displayed and cannot be configured.

PAN-222253
This issue is now resolved. See PAN-OS 10.2.8 Addressed Issues.
On the Panorama management server, policy rulebase reordering when you View Rulebase by Groups (Policy >) does not persist if you reorder the policy rulebase by dragging and dropping individual policy rules and then moving the entire tag group.

PAN-221775
A Malformed Request error is displayed when you Test Connection for an email server profile (Device > Server Profiles > Email) using SMTP over TLS and the Password includes an ampersand (&).

PAN-221015
This issue is now resolved. See PAN-OS 10.2.7 Addressed Issues.
On M-600 appliances in Panorama or Log Collector mode, the es-1 and es-2 ElasticSearch processes fail to restart when the M-600 appliance is rebooted. The results in the Managed Collector ES health status (Panorama > Managed Collectors >Health Status) to be degraded. Workaround: Log in to the Panorama or Log Collector CLI experiencing degraded ElasticSearch health and restart all ElasticSearch processes. admin> debug elasticsearch es-restart optional all Copy

PAN-219644
This issue is now resolved. See PAN-OS 10.2.8 Addressed Issues.
Firewalls forwarding logs to a syslog server over TLS (Objects> Log Forwarding) use the default Palo Alto Networks certificate instead of the custom certificate configured on the firewall.

PAN-218521
This issue is now resolved. See PAN-OS 10.2.7 Addressed Issues.
The ElasticSearch process on the M-600 appliance in Log Collector mode may enter a continuous reboot cycle. This results in the M-600 appliance becoming unresponsive, consuming logging disk space, and preventing new log ingestion.

PAN-217307
This issue is now resolved. See PAN-OS 10.2.11 Addressed Issues.
The following Security policy rule (Policies > Security) filters return no results: log-start eq no log-end eq no log-end eq yes

PAN-215778
This issue is now resolved. See PAN-OS 10.2.5 Addressed Issues.
On the M-600 appliance in Management Only mode, XML API Get requests for /config fail with the following error due to exceeding the total configuration size supported on the M-600 appliance. 504 Gateway timeout

PAN-215082
This issue is now resolved. See PAN-OS 10.2.8 Addressed Issues.
M-300 and M-700 appliances may generate erroneous system logs (Monitor > Logs > System) to alert that the M-Series appliance memory usage limits are reached.

PAN-213746
On the Panorama management server, the Hostkey displayed as undefined undefined if you override an SSH Service Profile (Device > Certificate Management > SSH Service Profile) Hostkey configured in a Template from the Template Stack.

PAN-213119
PA-5410 and PA-5420 firewalls display the following error when you view the Block IP list (Monitor > Block IP): show -> dis-block-table is unexpected

PAN-212889
This issue is now resolved. See PAN-OS 10.2.14 Addressed Issues
On the Panorama management server, different threat names are used when querying the same threat in the Threat Monitor (Monitor > App Scope > Threat Monitor) and ACC. This results in the ACC displaying no data to display when you are redirected to the ACC after clicking a threat name in the Threat Monitor and filtering the same threat name in the Global Filters.

PAN-212533
Modifying the Administrator Type for an existing administrator (Device > Administrators or Panorama >Administrators) from Superuser to a Role-Based custom admin, or vice versa, does not modify the access privileges of the administrator.

PAN-211531
On the Panorama management server, admins can still perform a selective push to managed firewalls when Push All Changes and Push for Other Admins are disabled in the admin role profile (Panorama > Admin Roles).

PAN-209937
Certificate-based authentication for administrator accounts may be unable to log into the Panorama or firewall web interface with the following error: Bad Request - Your browser sent a request that this server could not understand

PAN-208325
This issue is now resolved. See PAN-OS 10.2.5 Addressed Issues.
The following NextGen firewalls and Panorama management server models are unable to automatically renew the device certificate (Device > Setup > Management or Panorama >Setup > Management). M-300 and M-700 PA-410 Firewall PA-440, PA-450, and PA-460 Firewalls PA-3400 Series PA-5410, PA-5420, and PA-5430 Firewalls PA-5450 Firewall Workaround: Log in to the firewall CLI or Panorama CLI and fetch the device certificate. admin> request certificate fetch

PAN-207629
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
On the Panorama management server, selective push fails to managed firewalls if the managed firewalls are enabled with multiple vsys and the Push Scope contains shared objects in device groups.

PAN-206909
The Dedicated Log Collector is unable to reconnect to the Panorama management server if the configd process crashes. This results in the Dedicated Log Collector losing connectivity to Panorama despite the managed collector connection Status (Panorama > Managed Collector) displaying connected and the managed colletor Health status displaying as healthy. This results in the local Panorama config and system logs not being forwarded to the Dedicated Log Collector. Firewall log forwarding to the disconnected Dedicated Log Collector is not impacted. Workaround: Restart the mgmtsrvr process on the Dedicated Log Collector. Log in to the Dedicated Log Collector CLI. Confirm the Dedicated Log Collector is disconnected from Panorama. admin> show panorama-status Verify the Connected status is no. Restart the mgmtsrvr process. admin> debug software restart process management-server

PAN-206268
On the Panorama management server, the Auth Key field was erroneously displayed when you configure the Panorama Settings (Device > Setup > Management) as part of a template or template stack configuration.

PAN-206253
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
For PA-3400 Series firewalls, the default log rate is set too low and the max configurable log rate is incorrectly capped resulting in the firewall not generating more than 6,826 logs per second.

PAN-206243
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
The PA-220 firewall reaches the maximum disk usage capacity multiple a day that requires a disk cleanup. A critical system log (Monitor > Logs > System) is generated each time the firewall reaches maximum disk usage capacity.

PAN-205187
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
ElasticSearch may not start properly when a newly installed Panorama virtual appliance powers on for the first time, resulting in the Panorama virtual appliance being unable to query logs forwarded from the managed firewall to a Log Collector. Workaround: Log in to the Panorama CLI and start the PAN-OS software. admin> request restart software

PAN-204663
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
On the Panorama management server, you are unable to Context Switch from one managed firewall to another. Workaround: After you Context Switch to a managed firewall, you must first Context Switch back to Panorama before you can continue to Context Switch to a different managed firewall.

PAN-201855
This issue is now resolved. See PAN-OS 10.2.5 Addressed Issues.
On the Panorama management server, cloning any template (Panorama > Templates) corrupts certificates (Device >Certificate Management > Certificates) with the Block Private Key Export setting enabled across all templates. This results in managed firewalls experiencing issues wherever the corrupted certificate is referenced. For example, you have template A, B, and C where templates A and B have certificates with the Block Private Key Export setting enabled. Cloning template C corrupts the certificates with Block Private Key Export setting enabled in templates A and B. Workaround: After cloning a template, delete and re-import the corrupted certificates.

PAN-199557
This issue is now resolved. See PAN-OS 10.2.5 Addressed Issues.
On M-600 appliances in an Active/Passive high availability (HA) configuration, the configd process restarts due to a memory leak on the Active Panorama HA peer. This causes the Panorama web interface and CLI to become unresponsive. Workaround: Manually reboot the Active Panorama HA peer.

PAN-197341
On the Panorama management server, if you create multiple device group Objects with the same name in the Shared device group and any additional device groups (Panorama >Device Groups) under the same device group hierarchy that are used in one or more Policies, renaming the object with a shared name in any device group causes the object name to change in the policies where it is used. This issue applies only to device group objects that can be referenced in a Security policy rule. For example: You create a parent device group DG-A and a child device group DG-B. You create address objects called AddressObjA in the Shared, DG-A and DG-B device groups and add AddressObjA to a Security policy rule under DG-A and DG-B. Later, you change the AddressObjA name in the Shared device group to AddressObjB. Changing the name of the address object in the Shared device group causes the references in the Policy rule to use the renamed Shared object instead of the device group object.

PAN-197097
Large Scale VPN (LSVPN) does not support IPv6 addresses on the satellite firewall.

PAN-196758
On the Panorama management server, pushing a configuration change to firewalls leveraging SD-WAN erroneously show the auto-provisioned BGP configurations for SD-WAN as being edited or deleted despite no edits or deletions being made when you Preview Changes (Commit > Push to Devices >Edit Selections or Commit > Commit and Push > Edit Selections).

PAN-196720
During the CN-Series firewall deployment on Oracle OKEplatform, when you delete the deployment by deleting yamls, the MP/DP pods are stuck in Terminating state. Workaround: Delete the CN-Series DP pods, MP pods, and then the pan-cni yaml file in a sequential order.

PAN-194826
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
(WF-500 appliance only) System log forwarding does not work over a TLS connection.

PAN-194519
(PA-5450 firewall only) Trying to configure a custom payload format under Device > Server Profiles > HTTP yields a Javascript error.

PAN-194515
(PA-5450 firewall only) The Panorama web interface does not display any predefined template stack variables in the dropdown menu under Device > Setup > Log Interface > IP Address. Workaround: Configure the log interface IP address on the individual firewall web interface instead of on Panorama.

PAN-193251
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
If SAML is configured as the authentication method for GlobalProtect, authentication on the Portal page is not successful in the browser. Workaround: Use the GlobalProtect app installed on the endpoint to authenticate.

PAN-192403
(PA-5450 firewall only) There is no commit warning in the web interface when configuring the management interface and logging interface in the same subnetwork. Having both interfaces in the same subnetwork can cause routing and connectivity issues.

PAN-191570
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
The Traffic Activity and SSL/TLS widgets in the ACC erroneously display Report Error if there is no SSL data to display.

PAN-190727
(PA-5450 firewall only) Documentation for configuring the log interface is unavailable on the web interface and in the PAN-OS Administrator’s Guide.

PAN-190435
When you Commit a configuration change, the Task Manager commit Status goes directly from 0% to Completed and does accurately reflect the commit job progress.

PAN-190311
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
(PA-220 and PA-220R firewalls and PA-800 Series firewalls only) There is an issue where management connectivity to the firewall is lost due to the expiration of the DHCP lease, which causes the IP configuration on the management port to be purged.

PAN-189425
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
On the Panorama management server, Export Panorama and devices config bundle (Panorama > Setup > Operations) fails to export. When the export fails, you are redirected to a new window and the following error is displayed: Failed to redirect error to /var/log/pan/appweb3-panmodule.log (Permission denied)

PAN-189395
This issue is now resolved. See PAN-OS 10.2.2 Addressed Issues.
Running any version of PAN-OS 10.2 on a PA-400 Series firewall can cause the dataplane process to restart unexpectedly and trigger a crash.

PAN-189380
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
After you successfully upgrade a PA-3000 Series firewall to PAN-OS 10.2.0 or later release and Enterprise data loss prevention (DLP) plugin 3.0.0 or later release, the first configuration push from the Panorama management server causes the firewall dataplane to crash. Workaround: Restart the firewall to restore dataplane functionality. Log in to the firewall CLI. Restart the firewall. admin> request restart system

PAN-189361
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
Panorama is unable to distribute antivirus signature updates to firewalls with only an Advanced Threat Prevention license. Firewalls with previously installed and active Threat Prevention license are unaffected.

PAN-189298
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
On deploying the HA with 10.2.0-98 in Packet-mmap mode, the session sync for an existing session fails after restarting an active DP in Packet-mmap mode.

PAN-189214
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
When the Advanced Threat Prevention license is present on a firewall without a Threat Prevention license, the antivirus signature update packages that are normally available to install under Device > Dynamic Updates are not displayed. Workaround: Use the request anti-virus upgrade {info | download | install} CLI commands to retrieve a list of available antivirus updates and the download and installation status, download specific antivirus packages, and to install antivirus packages.Optionally, you can schedule recurring automatic updates using the following CLI command: set deviceconfig system update-schedule anti-virus recurring.

PAN-189206
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
Device Group and Template administrator roles don't support a context switch between the Panorama and firewall web interface. Workaround: Use a Superuser or Panorama administrator role to context switch.

PAN-189111
After deleting an MP pod and it comes up, the show routing command output appears empty and traffic stops working.

PAN-189106
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
On the Panorama management server, you must uninstall the ZTP Plugin 2.0 before you can successfully downgrade to PAN-OS 10.1. After successful downgrade, you must reinstall the latest ZTP Plugin 1.0 version. Workaround: Before you downgrade Panorama to PAN-OS 10.1, uninstall ZTP Plugin 2.0. After you successfully downgrade Panorama to PAN-OS 10.1, re-install ZTP Plugin 1.0 and re-enable ZTP functionality. Log in to the Panorama web interface. Uninstall the ZTP Plugin. Downgrade Panorama to PAN-OS 10.1. Log in to the Panorama web interface. Install the ZTP plugin. Select Panorama > Zero Touch Provisioning and check (enable) ZTP.

PAN-189076
On a firewall with Advanced Routing enabled, OSPFv3 peers using a broadcast link and a designated router (DR) priority of 0 (zero) are stuck in a two-way state after HA failover. Workaround: Configure at least one OSPFv3 neighbor with a non-zero priority setting in the same broadcast domain.

PAN-189057
This issue is now resolved. See PAN-OS 10.2.2 Addressed Issues.
On the Panorama management server, Panorama enters a non-functional state due to php.debug.log life taking up too much space. Workaround: Disable the debug flag for Panorama. Log in to the Panorama web interface. In the same browser you are logged into the Panorama web interface, enter the following URL. https:///debug Uncheck (disable) Debug or Clear Debug. (HA configuration) Repeat this step on each Panorama high availability (HA) peer if Panorama is in a HA configuration.

PAN-189032
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
When the firewall has Advanced Routing enabled, an OSPFv3 interface configured with the p2mp link type causes the commit to fail.

PAN-188956
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
After successful upgrade to PAN-OS 10.2, logging in to the firewall or Panorama web interface from the same Internet browser window or session from which the firewall or Panorama was upgraded displays the following error: Your login session has expired and you have been logged out for security reasons. Please log in again if you wish to continue. Workaround: The following are different ways to log in to the firewall or Panorama web interface after upgrading to PAN-OS 10.2. Close the browser and log in to the firewall or Panorama web interface from an entirely new browser session. Clear your browser cache for the browser from which you upgraded the firewall or Panorama. Log in to the firewall or Panorama web interface from the browser in Incognito mode. If you upgraded the firewall or Panorama from a browser in Incognito mode, close the browser and log in to the firewall or Panorama web interface from an entirely new browser session. Log in to the firewall or Panorama web interface from a different browser than the one used to upgrade to PAN-OS.

PAN-188904
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
Certain web pages and web page contents might not properly load when cloud inline categorization is enabled on the firewall.

PAN-188489
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
On the Panorama management server, dynamic content updates are not automatically pushed to VM-Series firewalls licensed using the Panorama Software Firewall License plugin when Automatically push content when software device registers to Panorama (Panorama > Templates > Add Stack) is enabled.

PAN-188358
After triggering a soft reboot on a M-700 appliance, the Management port LEDs do not light up when a 10G Ethernet cable is plugged in.

PAN-188064
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
The SCP Server Profile configuration (Devices > Server Profiles > SCP are not automatically deleted after downgrade from PAN-OS 10.2.0 to PAN-OS 10.1 or earlier release.

PAN-188052
Devices in FIPS-CC mode are unable to connect to servers utilizing ECDSA-based host keys that impacts exporting logs (Device > Scheduled Log Export), exporting configurations (Device > Scheduled Config Export), or the scp export command in the CLI. Workaround: Use RSA-based host keys on the destination server.

PAN-187846
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
On the Panorama management server, a selective push (Commit > Push to Devices > Push Changes Made By and Commit > Commit and Push > Commit and Push Changes Made By) may push an incorrect configuration to managed firewalls causing the firewalls to display as Out of Sync if the Panorama pushed version for the Shared Policy and Template configuration (Panorama > Managed Devices > Summary) are 20 version or more older than the current local running configuration on Panorama. To determine the current configuration version, select Panorama > Config Auditand expand the Local Running config menu to review the list of Panorama configuration versions. Workaround: Push a more recent configuration to your managed firewalls before performing a selective push.

PAN-187685
On the Panorama management server, the Template Status displays no synchronization status (Panorama > Managed Devices > Summary) after a bootstrapped firewall is successfully added to Panorama. Workaround: After the bootstrapped firewall is successfully added to Panorama, log in to the Panorama web interface and select Commit > Push to Devices.

PAN-187643
If you enable SCTP security using a Panorama template when SCTP INIT Flood Protection is enabled in the Zone Protection profile using Panorama and you commit all changes, the commit is successful but the SCTP INIT option is not available in the Zone Protection profile. Workaround: Log out of the firewall and log in again to make the SCIT INIT option available on the web interface.

PAN-187612
On the Panorama management server, not all data profiles (Objects > DLP Data Filtering Profiles) are displayed after you: Upgrade Panorama to PAN-OS 10.2 and upgrade the Enterprise DLP plugin to version 3.0. Downgrade Panorama to PAN-OS 10.1 and downgrade the Enterprise DLP plugin to version 1.0. Workaround: Log in to the Panorama CLI and reset the DLP plugin. admin > request plugins dlp reset

PAN-187429
This issue is now resolved. See PAN-OS 10.2.2 Addressed Issues.
On PA-3400 & PA-5400 series firewalls (minus the PA-5450), the CLI and SNMP MIB walk do not display the Model and Serial-number of the Fan tray and PSUs.

PAN-187407
The configured Advanced Threat Prevention inline cloud analysis action for a given model might not be honored under the following condition: If the firewall is set to Hold client request for category lookup and the action set to Reset-Both and the URL cache has been cleared, the first request for inline cloud analysis will be bypassed.

PAN-187370
On a firewall with Advanced Routing enabled, if there is also a logical router instance that uses the default configuration and has no interfaces assigned to it, this will result in terminating the management daemon and main routing daemon in the firewall during commit. Workaround: Do not use a logical router instance with no interfaces bound to it.

PAN-187234
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
Certain web pages submitted for analysis by Advanced URL Filtering cloud inline categorization might experience high latency.

PAN-186913
This issue is now resolved. See PAN-OS 10.2.2 Addressed Issues.
On the Panorama management server, Validate Device Group (Commit > Commit and Push erroneously issues a CommitAll operation instead of a ValidateAll operation when multiple device groups are included in the push and results in no configuration validation. Workaround: Validate device group configurations using one of the following methods. Select only one device group when you Validate Device Group for a Commit and Push to managed firewalls. To validate multiple device groups, select Commit >Commit to Panorama first. After the device group configuration is committed to Panorama, select Commit >Push to Devices and Validate Device Group to validate multiple device groups.

PAN-186886
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
Individual configuration objects cannot be viewed when you commit selective configuration changes (Commit > Commit Changes Made By) on a multi-vsys firewall.

PAN-186283
Templates appear out-of-sync on Panorama after successfully deploying the CFT stack using the Panorama plugin for AWS. Workaround: Use Commit > Push to Devices to synchronize the templates.

PAN-186282
On HA deployments on AWS and Azure, Panorama fails to populate match criteria automatically when adding dynamic address groups. Workaround: Reboot the Panorama HA pair.

PAN-186262
The Panorama management server in Panorama or Log Collector mode may become unresponsive as Elasticsearch accumulates internal connections related to logging processes. The chances Panorama becomes unresponsive increases the longer Panorama remains powered on. Workaround: Reboot Panorama if it becomes unresponsive.

PAN-186137
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
The management interface of the PA-3400 Series firewall incorrectly displays 10G port speed as an option. 10G speed is not supported on the PA-3400 Series firewall management port and cannot be configured.

PAN-186134
On the Panorama management server, performing a Commit and Push (Commit > Commit and Push) may intermittently not push the committed configuration changes to managed firewalls. Workaround: Select Commit > Push to Devices to push the committed configuration changes to your managed firewalls.

PAN-185966
The debug skip-cert-renewal-check-syslog yes command is not available on Log Collector CLI to stop the Dedicated Log Collector from trying to renew the device certificate and displaying the following error: No valid device certificate found

PAN-185286
This issue is now resolved. See PAN-OS 10.2.8 Addressed Issues.
(PA-5400 Series firewalls only) On the Panorama management server, the device health resources (Panorama >Managed Devices > Health) do not populate.

PAN-184708
This issue is now resolved. See PAN-OS 10.2.4 Addressed Issues.
Scheduled report emails (Monitor > PDF Reports > Email Scheduler) are not emailed if: A scheduled report email contains a Report Group (Monitor > PDF Reports > Report Group) which includes a SaaS Application Usage report. A scheduled report contains only a SaaS Application Usage Report. Workaround: To receive a scheduled report email for all other PDF report types: Select Monitor > PDF Reports > Report Groups and remove all SaaS Application Usage reports from all Report Groups. Select Monitor > PDF Reports > Email Scheduler and edit the scheduled report email that contains only a SaaS Application Usage report. For the Recurrence, select Disable and click OK. Repeat this step for all scheduled report emails that contain only a SaaS Application Usage report. Commit. (Panorama managed firewalls) Select Commit >Commit and Push

PAN-184702
This issue is now resolved. See PAN-OS 10.2.3 Addressed Issues.
On the Panorama management server, an M-700 appliance in Log Collector mode fails to connect to Panorama when added as a managed collector (Panorama > Managed Collectors). Workaround: Log in to the M-700 CLI and recover the Log Collector connectivity to Panorama.

PAN-184474
When the firewall has Advanced Routing enabled, a static route stays active after the interface goes down. Workaround: For firewalls that support Bidirectional Forwarding Detection (BFD), configure BFD for the static route.

PAN-184406
Using the CLI to add a RAID disk pair to an M-700 appliance causes the dmdb process to crash. Workaround: Contact customer support to stop the dmdb process before adding a RAID disk pair to a M-700 appliance.

PAN-183567
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
On the Panorama management server, you must download and install the ZTP Plugin 2.0 after successful upgrade to PAN-OS 10.2. After upgrade to PAN-OS 10.2, the show plugins installed command does not display the ZTP plugin until you install ZTP Plugin 2.0. Workaround: After Panorama successfully upgrades to PAN-OS 10.2, manually download and install the ZTP Plugin 2.0. Log in to the Panorama web interface. Select Panorama > Plugins and search for the ztp plugin. Download and Install ZTP Plugin 2.0.

PAN-183404
Static IP addresses are not recognized when "and" operators are used with IP CIDR range.

PAN-182734
This issue is now resolved. See PAN-OS 10.2.5 Addressed Issues.
On an Advanced Routing Engine, if you change the IPSec tunnel configuration, BGP flaps.

PAN-182492
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
The WildFire analysis report cannot be viewed from the firewall WildFire submission log entry page. Workaround: You can retrieve the Wildfire analysis reports through the WildFire API or the WildFire portal.

PAN-181933
If you use multiple log forwarding cards (LFCs) on the PA-7000 series, all of the cards may not receive all of the updates and the mappings for the clients may become out of sync, which causes the firewall to not correctly populate the Source User column in the session logs.

PAN-180661
On the Panorama management server, pushing an unsupported Minimum Password Complexity (Device > Setup> Management) to a managed firewall erroneously displays commit time out as the reason the commit failed.

PAN-180104
When upgrading a CN-Series as a DaemonSet deployment to PAN-OS 10.2, CN-NGFW pods fail to connect to CN-MGMT pod if the Kubernetes cluster previously had a CN-Series as a DaemonSet deployment running PAN-OS 10.0 or 10.1. Workaround: Reboot the worker nodes before upgrading to PAN-OS 10.2.

PAN-179420
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
On the Panorama management server, a selective push (Commit > Push to Devices > Push Changes Made By and Commit > Commit and Push > Commit and Push Changes Made By to managed firewalls fails if you rename an existing device group, template, or template stack that was already pushed to your managed firewalls and you selectively committed specific configuration objects from the renamed device group, template, or template stack. Workaround: After you rename the existing device group, template, or template stack, Push (Commit > Push to Devices all configuration changes for the named device group, template, or template stack.

PAN-178195
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
The URL filtering logs generated by traffic analyzed by Advanced URL filtering cloud inline categorization does not display the name of the URL.

PAN-177455
This issue is now resolved. See PAN-OS 10.2.2 Addressed Issues.
PAN-OS 10.2.0 is not supported on PA-7000 Series firewalls with HA (High Availability) clustering enabled and using an HA4 communication link. Attempting to load PAN-OS 10.2.0 on the firewall causes the PA-7000 100G NPC to go offline. As a result, the firewall fails to boot normally and enters maintenance mode. HA Pairs of Active-Passive and Active-Active firewalls are not affected.

PAN-176693
This issue is now resolved. See PAN-OS 10.2.1 Addressed Issues.
The Activity (ACT) LEDs on the RJ-45 ports of the M-300 and M-700 appliances do not blink while processing network traffic.

PAN-176156
This issue is now resolved. See PAN-OS 10.2.2 Addressed Issues .
Executing show running resource-monitor with the ingress-backlogs option produces the following server error: Dataplane is not up or invalid target-dp(.dp).

PAN-175915
When the firewall is deployed on N3 and N11 interfaces in 5G networks and 5G-HTTP/2 traffic inspection is enabled in the Mobile Network Protection Profile, the traffic logs do not display network slice SST and SD values.

PAN-174982
In HA active/active configurations where, when interfaces that were associated with a virtual router were deleted, the configuration change did not sync.

PAN-172274
When you activate the advanced URL filtering license, your license entitlements for PAN-DB and advanced URL filtering might not display correctly on the firewall — this is a display anomaly, not a licensing issue, and does not affect access to the services. Workaround: Issue the following command to retrieve and update the licenses: license request fetch.

PAN-172132
This issue is now resolved by PAN-189643. See PAN-OS 10.2.4 Addressed Issues.
QoS fails to run on a tunnel interface (for example, tunnel.1).

PAN-171938
No results are displayed when you Show Application Filter for a Security policy rule (Policies > Security > Application >Value > Show Application Filter).

PAN-171069
Local Log Collectors for Panorama management servers in active/passive high availability (HA) configuration cannot be added to the same Collector Group (Panorama > Collector Groups). Workaround: Before you upgrade your Panorama servers to PAN-OS 10.1.0, configure HA (Panorama > High Availability), add the local Log Collectors of the HA peers to the same Collector Group, and upgrade to PAN 10.1.0.

PAN-164885
This issue is now resolved. See PAN-OS 10.2.10 Addressed Issues.
On the Panorama management server, pushes to managed firewalls (Commit > Push to Devices or Commit and Push) may fail when an EDL (Objects > External Dynamic Lists) is configured to Check for updates every 5 minutes due to the commit and EDL fetch processes overlapping. This is more likely to occur when multiple EDLs are configured to check for updates every 5 minutes.

PAN-163676
Next-Gen Firewalls are unable to connect to a syslog server when the certificates required to connect to the syslog server are part of a Certificate Profile (Device > Certificate Management > Certificate Profile) if the Use OCSP setting is enabled to check the revocation status of certificates. Workaround: Enable Use CRL to check the revocation status of certificates in the Certificate Profile.
Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 26, 2026
Palo Alto Networks

PAN-OS 10.2.7-h6 Addressed Issues

Palo Alto Networks releases a hotfix addressing Panorama push failures and status issues, GlobalProtect tunnel and DHCP problems, memory leaks, process crashes, and Elasticsearch health alerts, alongside an HTTP/2 URL accessibility fix.

Resolved Issues

PAN-246431

This issue is resolved in this hotfix but not in PAN-OS 10.2.8.

Fixed an issue where a Push to Device operation remained at the state None when performing a selective push to device groups and templates that included both connected and disconnected firewalls.

PAN-242910

This issue is resolved in this hotfix but not in PAN-OS 10.2.8.

Fixed an issue where a custom based non Superuser was unable to push to firewalls.

PAN-242627

This issue is resolved in this hotfix but not in PAN-OS 10.2.8.

Fixed an issue where selective push did not work.

PAN-242561

Fixed an issue where GlobalProtect tunnels disconnected shortly after being established when SSL was used as the transfer protocol.

PAN-242027

Fixed an issue where the all-task process repeatedly restarted during memory allocation failures.

PAN-239367

Fixed an issue on the firewall where a memory leak associated with the logrcvr process occurred.

PAN-238643

This issue is resolved in this hotfix but not in PAN-OS 10.2.8.

Fixed an issue where a memory leak caused multiple processes to stop responding when VM Information Sources was configured.

PAN-237208

Fixed an issue where the reportd process stopped and the firewall rebooted.

PAN-235840

Fixed an issue where, after a configuration push from Panorama to managed firewalls, the status displayed as None and the push took longer than expected.

PAN-233789

Fixed an issue with commit and push and push operations where the user was not correctly bound to the scope, which caused all device groups to be selected for a selective push.

PAN-231148

Fixed an issue where no DHCP option list was defined when using GlobalProtect.

PAN-229090

Fixed an issue where the logrcvr process stopped responding during memory allocation failures.

PAN-228515

This issue is resolved in this hotfix but not in PAN-OS 10.2.8.

Fixed an issue where the Elasticsearch cluster health status displayed as yellow or red due to Elasticsearch SSH tunnel flaps.

PAN-223259

Fixed an issue where selective pushes failed with the error message Failed to generate selective push configuration. Unable to retrieve last in-sync configuration for the device, either a push was never done or version is too old. Please try a full push.

PAN-217293

Fixed a rare issue where URLs were not accessible when the header length was greater than 16,000 over HTTP/2.

PAN-199070

Fixed an issue where the all_task and pan_task processes stopped responding, which impacted traffic.
Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 26, 2026
Palo Alto Networks

PAN-OS 10.2.18-h8 Addressed Issues

Palo Alto Networks releases PAN-OS 10.2.18-h8 with CVE fixes and firewall stability, SIP session, and memory leak improvements.
The following table lists the addressed issues in PAN-OS 10.2.18-h8.

ISSUE ID — DESCRIPTION

— Fixes were made to address the following CVEs:

CVE-2026-0283

CVE-2026-0287

CVE-2026-0288

CVE-2026-0286

CVE-2026-0285

CVE-2026-0280

CVE-2026-0284

PAN-317466 — Fixed an issue where SIP sessions stopped progressing after the firewall received fragmented packets, fragmented at header field.

PAN-306555 — Fixed an issue where the firewall stopped responding, which led to service outages.

PAN-295803 — Addressed a memory leak issue under sc3 and automatic commit recovery (ACR) code path.

Original source
Oct 14, 2026
Date parsed from source:
Oct 14, 2026

First seen by Releasebot:
Oct 15, 2026
Palo Alto Networks

PAN-OS 11.2.4-h20 Addressed Issues

Palo Alto Networks fixes seven CVEs in a PAN-OS maintenance release.
The following table lists the addressed issues in PAN-OS 11.2.4-h20.

ISSUE ID
DESCRIPTION

—

Fixes were made to address the following CVEs:

CVE-2026-0283

CVE-2026-0287

CVE-2026-0288

CVE-2026-0286

CVE-2026-0285

CVE-2026-0280

CVE-2026-0284

Original source

Networking and Firewalls Release Notes

Products (9)

Latest Networking and Firewalls Updates

26.7.9 (November 11, 2026)

RouterOS 7.24.6 [long-term]

What's new in 7.24.6 (2026-10-30)

26.7.8 (October 30, 2026)

Here are the full patch notes:

PAN-OS 10.2.8-h15 Addressed Issues

PAN-OS 10.2.8-h15 Addressed Issues

PAN-OS 10.2.5-h1 Addressed Issues

PAN-OS 10.2.11 Known Issues

PAN-OS 10.2.0 Known Issues

PAN-OS 10.2.7-h6 Addressed Issues

Resolved Issues

PAN-246431

PAN-242910

PAN-242627

PAN-242561

PAN-242027

PAN-239367

PAN-238643

PAN-237208

PAN-235840

PAN-233789

PAN-231148

PAN-229090

PAN-228515

PAN-223259

PAN-217293

PAN-199070

PAN-OS 10.2.18-h8 Addressed Issues

ISSUE ID — DESCRIPTION

PAN-OS 11.2.4-h20 Addressed Issues